Manufacturer for Low Melt EVA Plastic Bags - Low Melt Batch Inclusion Bags – Zonpak

Product Detail

It is common that dust of raw materials flies everywhere in the workshop of rubber and tire plants, which causes harm to the workers' health and pollution to the production environment. To solve this problem, low melt batch inclusion bags were developed after lots of material analysis and experiments. With particular low melting points the bags are specially designed for the rubber or plastic compounding and mixing process. Workers can use these bags to pre-weigh and temporarily store the ingredients and additives. In the mixing process, the bags together with the materials contained can be direct put into a mixing machine as the quality of the final product will not be compromised. The using of the low melting batch inclusion bags largely improves the production environment, minimizes the worker exposure to hazardous materials, makes the weighing of the materials easier and increases the production efficiency. Properties： The bags are of specific low melting points 65-110 degree Celsius. Different melting points are available according to customers’ requirement. The bags can be direct put into a mill or mixer due to its good meltability and dispersity in rubber and plastic compounds. The bags have good tensile strength, impact strength, puncture resistance, flexibility, and rubber-like elasticity. The bags have good chemical stability, no toxicity, excellent environmental stress cracking resistance, weather resistance and compatibility with the rubber materials. The bags can be compatibly blended with natural rubber, styrene butadiene rubber (SBR), butadiene rubber (BR), solution polymerized butadiene styrene rubber (SSBR), polyisoprene rubber, high styrene resin and many other resins, without affecting the physical and chemical properties of the rubber, and it can be used as an active ingredient of the rubber formula, reducing the production cost and packaging waste. Applications: These bags are mainly used for packaging various chemical materials and reagents (e.g. white black carbon, black carbon, anti-aging agent, accelerator, sulphur and aromatic hydrocarbon oil) in the rubber industry (manufacture of tire, hose, belt, cable, seals, shoes), plastic processing industry (PVC, plastic pipe and extrude ) and rubber and plastic additives industry.

Technical Standards
Melting point	65-110 deg. C
Physical properties
Tensile strength	MD ≥16MPa TD ≥16MPa
Elongation at break	MD ≥400% TD ≥400%
Modulus at 100% elongation	MD ≥6MPa TD ≥3MPa
Appearance
Surface of the product is flat and smooth, there is no wrinkle, no bubble.