Hot New Products Low Melt EVA Film Roll Stock - EVA Packaging Film for Rubber Additives – Zonpak

Product Detail

Zonpak^TM EVA packaging film is specially designed to make little bags of rubber additives (e.g. 100g-5000g) with the automatic form-fill-seal (FFS) bagging machine. Various rubber additives or chemicals (e.g. rubber peptizer, anti-aging agent, curing agent, cure accelerator, rubber process oil) are commonly used in the rubber mixing process, and only little amounts of these materials are needed for each batch. So these little packages can help the material users improve work efficiency and avoid material waste. The film is made from EVA (copolymer of ethylene and vinyl acetate) which has a specific lower melting point and good compatibility with rubber or resin materials. So the bags together with the materials contained can be direct put into a mixer. The bags will melt and disperse into the rubber compound as a minor effective ingredient. Films with different melting points (65-110 degree Celsius) and thickness are available for different using conditions.

Technical Standards
Melting point	65-110 deg. C
Physical properties
Tensile strength	MD ≥16MPa TD ≥16MPa
Elongation at break	MD ≥400% TD ≥400%
Modulus at 100% elongation	MD ≥6MPa TD ≥3MPa
Appearance
Surface of the product is flat and smooth, there is no wrinkle, no bubble.