Good Quality Low Melt EVA Film - Low Melt EVA Packaging Film – Zonpak

ZonpakTM Low melt EVA packaging film is specially designed for the FFS (Form-Fill-Seal) automatic packaging of rubber and plastic processing additives. And it was developed after analyzing of the raw materials used in the tire and rubber factories and lots of experiments on automatic packing machines. The FFS packaging machine can accurately weigh the materials, then pack with the film and seal automatically. Due to the film’s properties of low melting point and good compatibility with rubber and other polymers, the bag together with the materials contained can be direct put into a mixing machine without affecting the product quality. Using this low melt packaging film can largely increase the production automation and efficiency, improve the working environment, and reduce the production cost. Rubber and plastic additive factories can use this film to make uniform little packages for the users’ convenience. PROPERTIES: l Different melting points are available according to customers’ requirement. The film has good meltability and dispersity in rubber and plastic. The packages of additives can be direct put into the mill or mixer. Strong physical properties of the film make it suitable for most of the automatic packaging machine. l The film material is non-toxic, has good chemical stability, environmental stress cracking resistance, weather resistance and compatibility with rubber and plastic materials. The film can be compatibly blended with natural rubber, styrene butadiene rubber (SBR), butadiene rubber (BR), Solution polymerized butadiene styrene rubber (SSBR), polyisoprene rubber, high styrene resin and many other resins, without affecting the physical and chemical property of the rubber, and it can be used as an active ingredient of the rubber formula, reducing the production cost and packaging waste. APPLICATIONS: This product is mainly used for little and middle size packages (less than 10kg) of various chemical materials and reagents (e.g. peptizer, anti-aging agent, accelerator, curing agent and aromatic hydrocarbon oil) in the rubber industry (tire, hose, belt, shoes), plastic processing industry (PVC, plastic pipe and extrude) and rubber and plastic additives industry.

Technical Standards

Melting point 65-110 deg. C
Physical properties
Tensile strength MD ≥16MPaTD ≥16MPa
Elongation at break MD ≥400%TD ≥400%
Modulus at 100% elongation MD ≥6MPaTD ≥3MPa
Appearance
Surface of the product is flat and smooth, there is no wrinkle, no bubble.